Factors to keep in mind when buying waterfall walls indoors

Designing and remodeling your commercial space could be challenging because there are so many items of decoration that are available in the market. But nothing to date has been able to beat the aesthetic appeal of waterfall walls indoors. They add a more natural and rustic feeling to the overall setup.

If you are among those people who are more concerned about water wall construction details, then you don’t need to be bothered about it any further as we’re providing you a complete guide about the waterfall wall indoors and outdoors and how it helps you to accentuate the overall look of your commercial settings.

  1. The kind of waterfall that suits your place:

As we mentioned earlier that there are so many options that are available in the market that it becomes quite overwhelming for the buyer to choose the right category. Waterfalls are offered to you in the form of bubble fountains, and waterfall walls for indoors and outdoors.

Before choosing any of the above-mentioned types, it is essential to look into the space that is available for the setup and where you are going to install the whole setup.

Once the place and the kind of indoor waterfall wall are decided, it allows you to narrow down your search options for all those people who don’t have much idea about what kind of indoor water wall may look perfect for your setting.

We would advise them to look into the waterfall wall experts and designers such as Midwest Tropical who could guide them and provide them with the correct selection.

  1. The size of the indoor waterfall walls:

When you have shortlisted the right kind of waterfall that might look perfect for your setting, the next decision that needs to be taken is the size of the waterfall wall fountain.

The size of the waterfall walls needs to be determined based on the available space and the place restrictions that you might have. For all those commercial settings that you are looking to decorate, it is essential to note that the indoor waterfall size should be adequate enough to get noticed and shouldn’t be big enough to look too overtly done for any commercial space.

However, from the expert’s viewpoint, we often advise our customers to take notes on the measurements of the space that is available for them. This allows you to know exactly what you are looking for and how much space you have for the right placement of the indoor waterfall wall.

  1. Consider waterfall wall features:

With the latest addition in technology, these conventional waterfall wall features have so much to offer. And therefore, you have lots of options to choose from lightning to adding details to getting your waterfall wall features customized.

If you haven’t looked at some of the details and the options that are offered to you, then you might miss out on some of the features that are offered to you.

Make sure to learn about some of the details about the additional features and how it helps you to elevate the look of your waterfall walls.

  1. The material of the waterfall wall fountain:

For all those people who are looking to invest in the waterfall wall fountain, you must consider that it is an expensive choice to make. Those who are offering high-quality material, durability, and visibility of the waterfall wall fountain depend upon the price that you are paying.

If you are going to compromise on the quality of the waterfall wall fountain, make sure that it comes to you as the precedence of the quality of the product. And you may not be able to find the right quality waterfall wall on a substandard material.

Factors That Should Be Considered Before Installing Indoor Waterfall

Factors That Should Be Considered Before Installing Indoor Waterfall

Some venues demands maintainance and addition of a custom indoor water feature enhances the beauty and give an exciting addition to the landscape. As the facility of indoor waterfall fountain is very unique and fascinating, but when you are going to install it in your facility then there are many factors that should be considered.

So, before you install a custom indoor waterfall there are few factors that you should keep in your mind, these are:

  1. Cost of the fountain:

One of the major factors that are of concern is the price of the indoor custom fountain. Once you set your budget, then accordingly you can narrow your search and find the one that is good for your facility as well as that is pocket friendly too.

Moreover, if you are installing the indoor waterfall through any company, then it is important that you inform them about your range initially so that they give their services accordingly.

  1. Variation in style:

There is much advancement in the style of the waterfall fountain, and when it comes to indoor waterfall fountains then there are many styles and variations that are available. There are amazing water fountains that are designed in a way that not only enhances the beauty of your location but also beneficial in many other ways.

The different styles of custom indoor waterfalls include the bubble waterfall, glass waterfall and water curtain walls that all are gorgeous in their own style.

  1. The material of the waterfall:

There is no limitation when it comes to the material of the waterfall. One of the most demanding and stunning material is the cast stone. The cast stone looks very beautiful when it is shaped into waterfall barrier. This material blends well and holds up the water falls very well. Though this material is much more expensive than other materials used but still it is worth investing.

Another material that is used extensively and which is less costly is metal. It withstands good with green and brown. But metal is usually good when the waterfall is designed for outdoors.

For indoors custom waterfalls, glass is now becoming very famous; the glass waterfall gives a beautiful and elegant look to your facility.

  1. Availability of space:

The space that you have is very important when you are choosing the waterfall for your indoor facility. There are different sizes of waterfall available and you should consider the size of the waterfall according to your facility.

The size is very important in the aspect that if you install too bigger waterfall in your indoor facility then everything will look dwarf and congested in your facility. And similarly you don’t want too small waterfall that is barely visible. The waterfall should be on the focal point of the area or facility. Hence you should first consider the size of the waterfall according to your facility and not choose the style first.

  1. Proper installation:

The proper installation of the waterfall in your facility is very important, because no matter how costly and good waterfall you have purchased but if the installation is not proper then it will not look good. So it is important that you should add the cost of the installation first in the budget.

The convenient way is to purchase the fountain from the specialty company and that company will install it for you or else you can hire professionals to install it for you.

If the fountain is small then you might do it yourself too, there are installation methods available with DIY tools. But it is much better to get it installed by professionals.

Some Facts And Features Of A Custom Indoor Waterfall

The dimensions of the œWater Curtain Wall” or “Custom Indoor Waterfall” designs are different: from small room compositions to powerful Tropical Water Features on the entire wall, depending on the dimensions, equipment, materials, decorative elements, decorative elements.

Custom Indoor Waterfall is quite convenient and easy to use, easy to care for, optimal in the price range, and at the same time harmonious, healthy and very useful water products in different styles. Water Curtain Wall can be combined with bas-reliefs and sculptures for classic interiors or make concise compositions of modern design.

Where are they most often used?

Tropical Water Features fit well into any interior. In the cafeteria, the Water Curtain Wall restaurants are used to design rooms and passages. In shopping and business centers, Custom Indoor Waterfall can be a basic design element or complete empty spaces. They are installed in living rooms in homes and apartments to humidify the air and give the interior uniqueness.

With the help of Tropical Water Features, it is possible to make a magnificent empty wall, for example, in the office center, when space is limited, and you need a memorable and beautiful visual design.The water pressure can be adjusted at will, the backlight that provides an additional original effect is also adjusted.

Fog installations create a special aura and attract views.

We carry out all the work from sketch design and Water Curtain Wall design before settling on site. We carry out the production ofcustom indoor waterfall, delivery and installation, in any city.We are ready to offer an option to execute the sources. As decoration, stones, pebbles, marble, glass and plants are often used.

The cost of the Custom Indoor Waterfall is calculated individually.

To calculate the cost, it is important to decide whether the Water Curtain Wall on the glass is autonomous or connected to communications, and the water will automatically be in it. Prices vary depending on the size of the wall (glass), the complexity of the structure, the power of the necessary equipment, and the desired finish and decoration.

At the same time, it is important to us the quality of the final products that we guarantee. Therefore, we at Midwest Tropical use for the manufacture of Tropical Water Features only high-quality components: pumps, sealants, electrical, waterproofing. The pumps are usually silenced to hear only the splashing of water and not the noise of the work equipment. With such equipment, stone and glass waterfalls work reliably and smoothly.

The fountain gives the speakers to the whole room, changes the atmosphere in the home or office. A unique individual platter reflects the good taste of the owner and makes the room original and memorable.

Regardless of the purpose, sizes and budget, we will produce unique and aesthetic œWater Curtain Wall” compositions for various style solutions. The Tropical Water Features will undoubtedly give your interior freshness and dynamics to your interior. And the play of water in a glass waterfall will create a unique image that you can admire infinitely.

We are ready to make any non-standard water wall, including various sizes, using chain elements, inkjet fonts, and combinations with bubble panels and any decorative border.

A Custom Indoor Waterfallis a wonderful decoration of the modern interior.

The water flowing through the glass simultaneously pacifies and soothes. Also, the presence of such a waterfall in one of the rooms has a beneficial effect on the room’s microclimate, hydrating the air.

 

How to Connect Copper Tubing to an Indoor Waterfall Wall for an Evaporative Cooler

How to Connect Copper Tubing to an Indoor Waterfall Wall for an Evaporative Cooler

DIY plumbing can easily connect copper tubing from an evaporative cooler to an indoor waterfall wall with a self-piercing valve. Also used to send water to ice-making machines from refrigerators, clamp poppet valves around a copper water supply pipe and pierce the wall of the pipe to supply the “tap” pipe. Copper tubing from evaporative coolers connects directly to the outlet of a saddle valve through a compression fitting. Taking advantage of the current water supply with a saddle valve relieves the DIY plumber of the pipe from cutting, welding, or gluing.

Instructions:

  • Twist the saddle-type valve bolts counterclockwise by hand or with a screwdriver or wrench to loosen and remove the bolts from the upper and lower saddle-type valve plates. Next, remove the bolts from the bolt holes and separate the upper and lower valve plates. Next, locate the water supply line closest to the evaporative cooler.
  • Lower plate mount valve retention against the bottom of the supply line. At the bottom of the valve top plate, attach the saddle-type valve rubber gasket. Rotate the left saddle-type valve handle to retract the valve needle into the valve body. Hold the top plate against the top of the supply line and align the top plate with the bottom plate.
  • Thread the screws through the top plate and the bottom plate. Tighten the screws until tight. Use a screwdriver or wrenches to fully tighten the screws and fully tighten the saddle valve in the supply line.
  • Twist saddle-type valve handle clockwise to extend valve needle through the pipe wall. Twist until the wall of the tube is felt and the needle enters the tube. Turn the valve compression nut counterclockwise to remove the nut and ferrule from the valve outlet. Slide the nut onto the copper tube with the nut thread toward the open end of the tube. Slide the ferrule onto the copper tube.

 

  • Final push of the tubing into the saddle-type valve outlet until the end of the tubing boots against the inside of the valve outlet. Slide nut and ferrule against valve outlet. Turn the nut clockwise to make the outlet nut threads. Finish tightening the nut with a wrench.
  • Unscrew the compression nut and an evaporative cooler float bushing from the inlet valve. Slide the cooler nut onto the loose end of the copper tubing with the nut’s thread facing the open end of the tubing. Slide the ferrule onto the tube. Insert the tube into the inlet until it reaches the inner tube of the inlet. Slide the nut and ferrule against the inlet, turn clockwise to secure the nut to the inlet, and finish tightening with a wrench.
  • Rotate saddle-type valve handle counterclockwise to retract needle valve and allow water to flow into the tubing. Check compression nut connections for leaks. To turn off the water, turn the valve handle.

How to clean interior wall waterfalls

Interior Wall Waterfalls bring a bit of nature in what a boon for apartment dwellers to enjoy the soft sound of water. Whether renting or buying, many people find the soothing sound of flowing water and the appearance of decorative indoor waterfall wall or a waterfall elevator aesthetically pleasing. However, interior wall waterfalls are susceptible to the build-up of algae and mineral deposits and should be cleaned regularly.

Instructions:

 

  • Disconnect the pump.
  • Remove any rocks or pebbles and place them in a bowl of warm water to soak.
  • Disconnect and disassemble the pump from the fountain according to the instructions that come with your fountain.
  • Clean mineral deposits and other debris from small holes inside and outside the pump using an old toothbrush. Place the fountain pump and tubes in the sink and quickly allow running water to flow through to wash off the dirt.
  • Empty all the water from the fountain container.
  • Dampen a damp sponge or nylon sponge with a calcium and lime remover product and rub off mineral deposits within the fountain.
  • Mix 1/4 cup of bleach or vinegar with 1 cup of water. Rinse the bowl of the fountain with the mixture to kill and clean away algae.
  • Rinse the bowl and stones or pebbles well with clean water and reassemble.

 

Tips and Warnings:

Direct sunlight encourages algae growth

Consider moving your interior wall waterfalls away from sunny windows.

Replace fountain water with distilled water to remove mineral deposits.

Consult your dealer or fountain manufacturer for information on commercial fountain cleaning products.

Premade Indoor Water Walls VS Custom Water Walls

Premade Indoor Water Walls VS Custom Water Walls

With minimalism prevailing, interior Decor trends are changing dramatically too. However, the indoor water walls are not going anywhere anytime soon because of their sensory details, cool aesthetics, and state-of-the-art looks.

It is because more and more educated minimalists love bringing natural elements like waterfalls and rockeries indoors, and water walls are no exception. But with hundreds of options available at high-end brands, how do you find the one that™s perfect for your commercial space? Midwest Tropical has a wide range of water walls, but you need to decide beforehand if you would like to get a pre-made stock water wall or a water wall that is custom-made for your particular business.

Here™s how they differ:

The Duration of Installation

When once they are ready, both options can be quickly installed in the desired region of your commercial property. However, most pre-made indoor water walls can be brought to the site instantly, while water features with custom water wall panels (ones with brand aesthetics) require time. Crafting them takes time since more effort and attention is required to incorporate each detail.

Brand Outlook and Coherence

If you are a big business planning to install a water feature in a long corridor or a welcome lobby, it is advisable to opt for custom water wall panels. You can choose to get the background designed as per your brand design, where the professionals would choose colors that match with your logo, tagline and overall color scheme. The design process may take time, but the output would surely be coherent with your overall commercial space, interior decor, and architecture.

Customization Options in water walls

While you can choose from hundreds of different water wall panels even in pre-made water walls, there are also limited options for customization. Opt for playback music and LED fairy lights of your choice, size, and other dimension options depending upon the part of the commercial property you are installing this water feature in.

If you have a restaurant or pub, with already loud music playing, playback wouldn™t matter much at night time. Similarly, if it™s a dentist™s office, a light relaxing, meditating sound would work its wonders.

Size
Ready-made water walls are good for small to medium-sized spaces. However, if you™d like to cover a huge wall or widely spacious area, it™s better to go for custom water walls. They are usually the best bets for old shopping malls getting renovated or museums and public offices where construction is partly under progress.

Indoor Water Walls Create An Incredible Architectural Statement

Not only water walls but there are endless other options to consider if you™d like to create a signature interior decor that™s unique to your brand, but popular worldwide. Vertical chamber water walls, indoor fountains, rain curtains, and reflection pools are only a few to count.

When it comes to bringing nature in contact with humanity, there is no limit to creativity. Whatever you can imagine, Midwest Tropical can turn it into reality. All you have to do is think of a spectacular background and watch Midwest Tropical do its magic!

Why do Grand Commercial Buildings have Indoor Waterfalls?

Why do Grand Commercial Buildings have Indoor Waterfalls?Grand commercial buildings utilize numerous fancy decor ideas and uplift their indoor space. One can choose to invest in huge showpieces or mannequins or restyle the entire ambiance to commemorate special events. Most of those design ideas may fall old as seasons would pass. Indoor waterfalls, however, remain evergreen because they carry a natural element and emit soothing vibes. This famous water feature is a way to bring nature inside and create an architectural statement that’s only witnessed at elite buildings in the world.

How can an indoor waterfall contribute to your commercial space?

Here’s why an indoor waterfall should be your first preference if you’re planning to up your commercial decor game.

  1. Designers can achieve architectural superiority with Indoor Waterfalls

Water features are unmatchable if we talk about quality, trends, and popularity altogether. The biggest shopping malls in contemporary environments have these indoor waterfalls, which have their own class. Corporates create signature decor and add their favorite panels with these water features to seamlessly improve their brand decor patterns. While you may also choose one of these indoor water features from Midwest Tropical, remember to discuss your site’s dimensions. The falling direction of water, the playback sound, and the fairy lights installed can all be customized as per the particular surroundings of your commercial space.

  1. Corporates redo their welcome lobbies, waiting areas, and corridors

Most Midwest Tropical clients love the fact that custom features like indoor waterfalls can cover long spaces that would otherwise show the ambiance as empty or deserted. This is the reason these features are installed in a hospital’s long corridor and sometimes in the waiting area. You’ll witness indoor waterfalls commonly at the entrance lobbies of five-star hotels or elite pubs, with instructional signages carrying the restaurant’s name.

  1. Indoor Waterfalls don’t consume a lot of space

Covering huge spaces is one great benefit of an indoor water feature, but that’s not the bane of their existence or prevalence. Visual marketing departments choose indoor waterfalls also because they can be placed anywhere, whether the area is congested or spacious. Horizontal panels can either be restricted or turned perpendicularly to suit arch or common corner walls.

  1. Water features are spotted behind staircases

There is no use placing motivational content, inspirational quotes or wax statues behind the staircase area. Though it’s an empty space, it surely receives the involuntary attention of visitors every day. So, if you have stairs in your office, restaurant, or clinic, an indoor waterfall is the best idea that would not only cover the vacant space, but this space would be utilized for good.

Alternate Water Feature Ideas for 2021 and Beyond…

Though indoor waterfalls and fountains are trending these days, Midwest Tropical has other high-end water features that would add new life to your commercial property. You can choose from rain curtains, bubble walls (either stock premade or customized), fountains, swirly rain curtain, and whatnot. The best part is that most of these water features would fit your brand palettes seamlessly if color is a must-have in your marketing policy. You can get your logo, taglines, and other brand aesthetics covered at the background panels, and add fairy lights. And when it comes to sound, what’s better than rustling leaves and waves?

Modern water features like indoor waterfalls are surely a blessing for anyone who doesn’t want to dedicate specific themes to their office decor. If you want to choose something high-class, stays alive for years, and requires little to zero maintenance efforts, then indoor waterfalls from Midwest Tropical are the best bet!

History of Indoor Waterfalls

History of Indoor Waterfalls

The concept of indoor water features has trickled over from outdoor fountains that were found in early modern Europe. They were seen in elaborate gardens of the wealthy and can still be spotted in urban designs of modern times. Initially, towns and communities depended on functioning water fountains to funnel water for washing, preparing food, and cleaning. Gravity was the power source of water features up until the nineteenth century. Indoor waterfalls work on the same concept, but Midwest Tropical has used advanced technology to utilize water and enhance all indoor spaces’ aesthetic value.

Water Features: the beginning 

The first water features or fountains didn’t resemble the image that pops up in our mind when we think of a fountain. The earliest known fountain was a carved stone basin that contained precious holy, drinking, and ceremonial water believed to exist around 2000BC.

Since there was no indoor plumbing, the ancient water features were often situated near rivers and streams to supply drinking water. The thought of using indoor waterfalls as decoration was initiated by the Romans in 6 BC. These water features were mostly bronze or stone masks of local and mythological heroes and those of animals.

The Romans had free-standing water fountains that had water coming out via lead pipes under the street.

Later…

The water features saw a decline in popularity during the middle ages and could only be found in literature, art and monasteries, and palace gardens. During those times, water fountains were perceived as symbols of wisdom, purity, life, and innocence. All of these characters are still exemplified through water and said to hold the secret of life.

Water features saw a surge in the medieval era but still remained familiar with isolated areas. Some fountains during this time were also used for amusement apart from being decoration pieces.

The Renaissance of Water Features

Water features developed into grand and elaborate fixtures during the European rebirth. The famous fountains of Europe were built in this period and were considered regal tributes. Fountains underwent a revival as the old aqueducts of Rome were rebuilt and restored, providing ample water supply to the fountains.

Water Features in the Contemporary World

The last century has seen a tremendous change in the function and style of indoor waterfalls. By the 1900s, water features were used solely for decorative purposes as widespread indoor plumbing became accessible to the masses. Mechanical water pumps replaced gravity as the main source of power to drive water into the feature. These were the frontrunners of modern water features that would recycle water efficiently.

Today you can see the prevalence of indoor water features in every place imaginable, from restaurants to healthcare facilities. Their acclaim lies in their ability to bring class and elegance while remaining understated style statements that don’t distract from the main theme. Their purpose is far and varied, from being used as decorative pieces to room dividers and partitions.

Water features have evolved in form and function throughout history, and technology has made them exquisite options to elevate aesthetics and exude classic vibes. They are incredible opportunities for businesses to showcase their regality and conscious efforts to promote elegance via natural elements.

Midwest Tropical can match your design concept right down to each detail, from all sizes of indoor waterfalls to customized bubble walls. Human beings can never tired of water features since their genes are mystified by natural elements. This is why water features have found their way into every private property, from residences to corporate offices.