Glass Wall Fountain: Things to Keep in Mind

Glass Wall Fountain: Things to Keep in Mind

Glass wall fountain for indoor use consist highly decorative elements that add a touch of elegance and relaxation to the environment. We know that there are many curtain waterfall models that you can find at Midwest Tropical, and there are so many that it will surely be quite tricky for you to choose the one that best suits your home and your tastes.

This is why; it is always challenging to choose the best glass wall fountain. This is basically because these sources are made up of many elements that must always be taken into consideration when we want to have the best source of water at our place. On some occasions, we have talked to you about indoor DIY Bubble Wall.

We love the Curtain Waterfall since it is such a precious element with water that gives life and joy to our rooms. The truth is glass wall fountain, DIY Bubble Wall or curtain waterfall all look great. However, there are several things to keep in mind.

To begin, we must look at the material.

This point is vital because the glass wall fountain made with 100% natural materials are beautiful and provide energetic properties to the environments. Thus, we can choose DIY Bubble Wall sources made from clay, stone, or even bamboo canes.

Although we recommend the first ones, the truth is that their price is higher than the sources made with silicones or plastics. So, if we want to save money, we can opt for the latter. Still, knowing that their maintenance can be a bit more expensive since they are generally less durable materials, at this point, it is necessary to talk about care.

Curtain Waterfall with natural materials is indeed more grateful in this sense. It is essential to pay attention to aspects such as water; if we want it to be clean and sharp, we must keep it away from the direct action of the sun’s rays and make sure that the engine works perfectly. If there is a constant movement, we can prevent the water from stagnating and turning green. If we want a little extra help, we can choose to place some kind of filter on the source.

Finally, we recommend that the motor of the indoor Curtain Waterfall fountain must be one of those that are connected to the light. Why? Well, because although batteries seem more comfortable to us, the truth is that they can be much more expensive in the long run. In addition, the intensity of the motor will be lower, and therefore, the relaxing noise of our small waterfall is much less perceptible.

How to Build a Container Garden Using a Water Fountain

Container gardens are helpful for small spaces or growing small water gardens in any home garden. Container gardens can use a variety of potential containers, including a water feature. Curtain Waterfall container gardens are an impressive addition to any garden by adding the elegance of aquatic plants to the beautiful sound of fountain water. Specifics will vary based on the plants and fountain used, but you can generally build a container garden with a water fountain.

Instructions:

  • Set up the water source. The water source should have at least a few inches of water available. Deeper water is preferable to some aquatic plants, such as water lilies, but many aquatic plants only need a few inches of water.
  • Set the fountain in an area that gets about 4 to 5 hours of sunshine a day.
  • Place the aquatic plants in the Glass Wall Fountain.
  • Make sure the plants are added to the fountain area where the water is still and not to places where the water is constantly moving.
  • Add appropriate fertilizers for aquatic plants. These can be purchased at any plant supply store or any store that sells aquatic plants. Avoid fertilizers used on regular ground plants and choose one that is made specifically for water plants.
  • Add water if necessary. Water should be added whenever it starts to evaporate.
  • Clean fountain pump and fountain as necessary to prevent algae build-up.

Indoor Water Fountains: How to Clean an Indoor Water Feature

Indoor Water Fountains: How to Clean an Indoor Water Feature

Interior decorators use indoor water fountains or inside waterfalls to add interest to a room. These waterfall wall fountains offer the calm, gentle sound of water and enhance a relaxing environment. Unfortunately, mineral deposits, algae silt, and hard water stains detract from the beauty of indoor water fountains and can clog the fountain pump if left in the fountain. In addition, water inside waterfalls can give off a foul odor, signaling the presence of bacteria.

Clean indoor water fountains extend the life of the water pump and restore the fountain’s visual appeal.

Instructions on how to clean indoor water fountains

Hard water stains:

  • Remove the electrical source from the wall socket. Drain the water from the fountain by pouring it into the sink. Water out of the fountain with a small spoon or cup, or vacuuming the water out for wet-dry if the fountain is not portable. Soak up all the water with a cloth.
  • Fill the fountain with equal amounts of water and white vinegar to remove mineral build-up on hoses and fountain pump fountain surfaces. Plug in the fountain and let it run for three to four hours. Disconnect the source.
  • Dip a sponge, cloth, or nylon sponge in the vinegar and water. Rub areas of the fountain that have mineral deposits from hard water until the mineral deposits are gone. Dip a soft bristle brush in the vinegar and water and clean the holes and crevices of the fountain.
  • Empty the vinegar and water from the Indoor Water Fountains and rinse the fountain with water.

Algae:

  • Disconnect the source from the outlet. Empty the water from the fountain, pour it down the drain, or remove it with a wet-dry vacuum.
  • Add water and 1/2 cup chlorine bleach per gallon of water to the fountain”the source from the plug into the wall outlet. Running the bleach and water through the fountain for two to three hours cleans algae from the pump hoses and cleans algae from the fountain’s reservoir.
  • Dip a soft brush, rag, sponge, or nylon sponge in the bleach and water. Scrub the fountain until the algae is no longer visible. Use a soft bristle brush for small, hard-to-reach areas.
  • Empty the bleach and water from the fountain and rinse the fountain with hot water.

Dirty fonts:

  • Take off all removable parts and disassemble as much of the indoor water fountains as possible if the fountain has been sitting unused for a long time or has thick layers of dirt, dust, or grime.
  • Rinse the parts and pieces of the fountain with clear water. Next, scrub the surfaces of the fountain with a cloth or a soft bristle brush. Rinse the dirt off the surface and continue scrubbing until all layers of dirt and dust easily rinse off the surfaces.
  • Fill a bathtub, sink, or large container with warm water and 1/2 cup of bleach. Place the parts of the fountain that remain dirt or stains in the bleach and water. Soak the pieces in the fountain for one or two hours.
  • Scrub the stains with a cloth, sponge, or soft brush to remove any dirt. Then, rinse the fountain parts with water.
  • Dry all pieces of a Waterfall Wall with a dish cloth. Reassemble the fountain.

Tips and Warnings:

  • Fill indoor water fountains with distilled water to avoid hard water stains.
  • Empty, clean, and fill indoor water fountains every four to eight weeks.
  • Add an algae inhibitor to the fountain water to prevent algae growth in the fountain.
  • Place a decorative cloth under table fountains to protect the tabletop from water splashes.
  • Do not immerse electrical plugs and cables in water.
  • Do not use scrubbing powder, steel wool, or other abrasive products to clean an indoor fountain; these cleaners will scratch the font.
  • Do not use soaps or detergents in a fountain. Soap and detergent residue soaks into the fountain materials and hoses, which then creates bubbles.